Amazon MSK Unauthorized access

Available in Zilla

Estimated time to complete 20-30 minutes.

Overview

The Zilla Plus for Amazon MSK Secure Public Access proxy lets authorized Kafka clients connect, publish messages and subscribe to topics in your Amazon MSK cluster via the internet.

In this guide we will deploy the Zilla Plus for Amazon MSK Secure Public Access proxy and verify locally trusted public internet connectivity to your MSK cluster from a Kafka client, using the wildcard domain *.aklivity.example.com.

AWS services used

Service	Required	Usage	Quota
Resource Groups and Tagging	Yes	Startup only	None
Secrets Manager	Yes	Startup only	Not reached
Certificate Manager	No Private key and certificate can be inline in Secrets Manager instead	Startup only	Not reached
Private Certificate Manager	No Private key and certificate can be inline in Secrets Manager instead	Startup only	Not reached

Default AWS Service Quotas are recommended.

Prerequisites

Before setting up internet access to your MSK Cluster, you will need the following:

• an MSK Cluster configured for TLS encrypted client access
• subscription to Zilla Plus for Amazon MSK via AWS Marketplace
• an VPC security group for the Zilla proxies
• an IAM security role for the Zilla proxies
• permission to modify local DNS resolution files, such as /etc/hosts on MacOS

Tips

Check out the Troubleshooting guide if you run into any issues.

Create the MSK Cluster

This creates your MSK cluster in preparation for secure access via the internet.

An MSK cluster is needed for secure remote access via the internet. You can skip this step if you have already created an MSK cluster with equivalent configuration.

Follow the Create MSK Cluster guide to setup the a new MSK cluster. We will use the below resource names to reference the AWS resources needed in this guide.

• Cluster Name: my-msk-cluster
• Access control methods: Unauthenticated access
• VPC: my-msk-cluster-vpc
• Subnet: my-msk-cluster-subnet-*
• Route tables: my-msk-cluster-rtb-*
• Internet gateway: my-msk-cluster-igw

Create the Zilla proxy security group

This creates your Zilla proxy security group to allow Kafka clients and SSH access.

A VPC security group is needed for the Zilla proxies when they are launched.

Follow the Create Security Group wizard with the following parameters and defaults. This creates your Zilla proxy security group to allow Kafka clients and SSH access.

• VPC: my-msk-cluster-vpc
• Name: my-zilla-proxy-sg
• Description: Kafka clients and SSH access
• Add Inbound Rule
  • Type: CUSTOM TCP
  • Port Range: 9094
  • Source type: Anywhere-IPv4
• Add Inbound Rule
  • Type: SSH
  • Source type: My IP
• Add Outbound Rule (if not exists)
  • Type: All traffic
  • Destination: Anywhere-IPv4
• Create the Security Group

Check your network settings

Your IP may be different when you SSH into the EC2 instance. VPNs and other networking infrastructure may cause the My IP inbound rule to fail. Instead, you can use one of the other ways AWS provides to execute commands in an EC2 instance.

Update the default security group rules

This allows the Zilla proxies to communicate with your MSK cluster.

Navigate to the VPC Management Console Security Groups table.

Check your selected region

Make sure you have selected the desired region, ex: US East (N. Virginia) us-east-1.

Filter the security groups by selecting a VPC and select the default security group.

• VPC: my-msk-cluster-vpc
• Security Group: default

Add a Custom TCP Rule

Add this Inbound Rule to allow the Zilla proxies to communicate with the MSK cluster.

• Type: Custom TCP
• Port Range: 9094
• Source type: Custom
• Source: my-zilla-proxy-sg

Create the Zilla proxy IAM security role

This creates an IAM security role to enable the required AWS services for the Zilla proxies.

Follow the Create IAM Role guide to create an IAM security role with the following parameters:

Name

aklivity-zilla-proxy

Policies

AWSCertificateManagerReadOnly
AWSCertificateManagerPrivateCAReadOnly
ResourceGroupsandTagEditorReadOnlyAccess

IAM role Inline Policies

This creates an IAM security role to enable the required AWS services for the Zilla proxies.

Name

MSKProxySecretsManagerRead

JSON Summary

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Sid": "VisualEditor0",
      "Effect": "Allow",
      "Action": [
        "secretsmanager:GetSecretValue",
        "secretsmanager:DescribeSecret"
      ],
      "Resource": [
        "arn:aws:secretsmanager:*:*:secret:wildcard.aklivity.example.com-*"
      ]
    }
  ]
}

If you used a different secret name for your certificate key.

Replace wildcard.example.aklivity.io in the resource regular expression for:

MSKProxySecretsManagerRead

Subscribe via AWS Marketplace

The Zilla Plus for Amazon MSK is available through the AWS Marketplace. You can skip this step if you have already subscribed to Zilla Plus for Amazon MSK via AWS Marketplace.

To get started, visit the Proxy's Marketplace Product Page and Subscribe to the offering. You should now see Zilla Plus for Amazon MSK listed in your AWS Marketplace subscriptions.

Create the Server Certificate

We need a TLS Server Certificate for the wildcard domain *.aklivity.example.com that can be trusted by a Kafka Client.

Follow the Create Server Certificate guide to create a new TLS Server Certificate for the example wildcard domain *.aklivity.example.com.

Info

Note the server certificate secret ARN as we will need to reference it from the Secure Public Access CloudFormation template.

Warning

Store the private CA certificate in a file called pca.pem as we will need it to configure trust when testing the Kafka client.

Deploy the Zilla Plus Secure Public Access Proxy

This initiates deployment of the Zilla Plus for Amazon MSK stack via CloudFormation.

Navigate to your AWS Marketplace subscriptions and select Zilla Plus for Amazon MSK to show the manage subscription page.

• From the Agreement section > Actions menu > select Launch CloudFormation stack
• Select the Secure Public Access (Unauthorized/SASL) fulfillment option
• Make sure you have selected the desired region selected, such as us-east-1
• Click Continue to Launch
  • Choose the action Launch CloudFormation

Click Launch to complete the Create stack wizard with the following details:

Step 1. Create Stack

• Prepare template: Template is ready
• Specify template: Amazon S3 URL
  • Amazon S3 URL: (auto-filled)

Step 2. Specify stack details

Stack name

my-zilla-proxy

Parameters:

• Network Configuration
  • VPC: my-msk-cluster-vpc
  • Subnets: my-msk-cluster-1a my-msk-cluster-1b my-msk-cluster-1c
• MSK Configuration
  • Wildcard DNS pattern: *.aklivity.[...].amazonaws.com *1
  • Port number: 9094
• Secure Public Access Configuration
  • Instance count: 2
  • Instance type: t3.small *2
  • Role: aklivity-zilla-proxy
  • Security Groups: my-zilla-proxy
  • Secrets Manager Secret ARN: <TLS certificate private key secret ARN> *3
  • Public Wildcard DNS: *.aklivity.example.com
  • Public Port: 9094
  • Key pair for SSH access: my-key-pair *4
• *Configuration Reference
  1. Follow the Lookup MSK Server Names guide to discover the wildcard DNS pattern for your MSK cluster.
  2. Consider the network throughput characteristics of the AWS instance type as that will impact the upper bound on network performance.
  3. This is the ARN of the created secret for the signed certificate's private key that was returned in the last step of the Create Server Certificate guide.
  4. Follow the Create Key Pair guide to create a new key pair to access EC2 instances via SSH.

Step 3. Configure stack options: (use defaults)

Step 4. Review

Confirm the stack details are correct and Submit to start the CloudFormation deploy.

Info

When your Zilla proxy is ready, the CloudFormation console will show CREATE_COMPLETE for the newly created stack.

Verify Zilla proxy Service

This checks that the services and networking were properly configured.

Navigate to the EC2 running instances dashboard.

Check your selected region

Make sure you have selected the desired region, ex: US East (N. Virginia) us-east-1.

Select either of the Zilla proxies launched by the CloudFormation template to show the details.

Info

They each have an IAM Role name starting with aklivity-zilla-proxy.

Find the Public IPv4 Address and then SSH into the instance.

ssh -i ~/.ssh/<key-pair.cer> ec2-user@<instance-public-ip-address>

After logging in via SSH, check the status of the zilla-plus system service.

Service is running

Verify that the zilla-plus service is active and logging output similar to that shown below.

systemctl status zilla-plus.service

zilla-plus.service - Zilla Plus
   Loaded: loaded (/etc/systemd/system/zilla-plus.service; enabled; vendor preset: disabled)
   Active: active (running) since...

Check Ports

Check for the active ports with netstat.

netstat -ntlp

tcp6    0    0 :::9092    :::*    LISTEN    1726/.zpm/image/bin 

Check Zilla Logs

You can get an stdout dump of the zilla-plus.service using journalctl.

journalctl -e -u zilla-plus.service | tee -a /tmp/zilla.log

systemd[1]: Started zilla-plus.service - Zilla Plus.
...

Check Cloud Init Logs

All output from cloud-init is captured by default to /var/log/cloud-init-output.log. There shouldn't be any errors in this log.

cat /var/log/cloud-init-output.log 

Cloud-init v. 22.2.2 running 'init'...

Check the networking of the Zilla proxy instances to MSK.

DNS resolving

Verify that the instance can resolve the private Route53 DNS address.

nslookup *.aklivity.[...].amazonaws.com

Server:		***
Address:	***

Non-authoritative answer:
Name:	*.aklivity.[...].amazonaws.com
Address: ***

Check Ports

Check the communication over necessary ports with netcat.

nc -vz *.aklivity.[...].amazonaws.com 9096

Connection to *.aklivity.[...].amazonaws.com port 9096 [tcp/italk] succeeded!

Repeat these steps for each of the other Zilla proxies launched by the CloudFormation template if necessary.

Verify Kafka Client Connectivity

To verify that we have successfully enabled public internet connectivity to our Kafka cluster from the local development environment, we will use a generic Kafka client to create a topic, publish messages and then subscribe to receive these messages from our Kafka cluster via the public internet.

Install the Kafka Client

First, we must install a Java runtime that can be used by the Kafka client.

sudo yum install java-1.8.0

Now we are ready to install the Kafka client:

wget https://archive.apache.org/dist/kafka/2.8.0/kafka_2.13-2.8.0.tgz
tar -xzf kafka_2.13-2.8.0.tgz
cd kafka_2.13-2.8.0

Tips

We use a generic Kafka client here, however the setup for any Kafka client, including KaDeck, Conduktor, and akhq.io will be largely similar. With the Zilla proxy you can use these GUI Kafka clients to configure and monitor your Kafka applications, clusters and streams.

Trust the Private Certificate Authority

Import the private CA certificate into your trust store.

keytool -importcert -keystore /tmp/kafka.client.truststore.jks -storetype jks -storepass generated -alias pca -file Certificate.pem

Info

When you followed the Create Certificate Authority guide, you exported the private CA certificate to a file called Certificate.pem.

Configure the Kafka Client

With the Kaka client now installed we are ready to configure it and point it at the Zilla proxy.

The Zilla proxy relies on TLS so we need to create a file called client.properties that tells the Kafka client to use SSL as the security protocol and to trust your private certificate authority as the signer of the *.aklivity.example.com certificate.

client.properties

security.protocol=SSL
ssl.truststore.location=/tmp/kafka.client.truststore.jks

Configure Local DNS

When using an example wildcard DNS such as *.aklivity.example.com then the DNS entries are setup locally.

Navigate to the CloudFormation console. Then select the my-zilla-proxy stack to show the details.

Check your selected region

Make sure you have selected the desired region, ex: US East (N. Virginia) us-east-1.

In the stack Outputs tab, find the public DNS name of the NetworkLoadBalancer, and lookup the public IP addresses, as shown in the following example.

nslookup my-pu-Netwo-xxxxxxxxxxxx-yyyyyyyyyyyyyyyy.elb.us-east-1.amazonaws.com

Server:  10.5.1.21
Address: 10.5.1.21#53

Non-authoritative answer:
Name: my-pu-Netwo-xxxxxxxxxxxx-yyyyyyyyyyyyyyyy.elb.us-east-1.amazonaws.com
Address: 107.21.117.233
Name: my-pu-Netwo-xxxxxxxxxxxx-yyyyyyyyyyyyyyyy.elb.us-east-1.amazonaws.com
Address: 54.235.158.55
Name: my-pu-Netwo-xxxxxxxxxxxx-yyyyyyyyyyyyyyyy.elb.us-east-1.amazonaws.com
Address: 3.226.64.246

Then add local DNS entries for the bootstrap proxy names needed by the Kafka client to /etc/hosts.

/etc/hosts

107.21.117.233  b-1.aklivity.example.com b-2.aklivity.example.com b-3.aklivity.example.com
54.235.158.55   b-1.aklivity.example.com b-2.aklivity.example.com b-3.aklivity.example.com
3.226.64.246    b-1.aklivity.example.com b-2.aklivity.example.com b-3.aklivity.example.com

This allows Kafka clients to use the following TLS bootstrap proxy names for privately signed TLS wildcard certificate:

b-1.aklivity.example.com:9094,b-2.aklivity.example.com:9094,b-3.aklivity.example.com:9094

You can use these bootstrap server names when connecting to your MSK cluster.

Warning

If you add another broker to your MSK cluster, then you will need to add another local DNS entry, such as b-4.aklivity.example.com. This is required only for MSK Unauthorized access deployments, not MSK SASL/SCRAM authentication or MSK mTLS authenticationdeployments.

Test the Kafka Client

This verifies internet connectivity to your MSK cluster via Zilla Plus for Amazon MSK.

We can now verify that the Kafka client can successfully communicate with your MSK cluster via the internet to create a topic, then publish and subscribe to the same topic.

Use the following as TLS bootstrap server names for the Kafka client:

b-1.aklivity.example.com:9094,b-2.aklivity.example.com:9094,b-3.aklivity.example.com:9094

Create a Topic

Use the Kafka client to create a topic called zilla-proxy-test, replacing <tls-bootstrap-server-names> in the command below with the TLS proxy names of your Zilla proxy:

bin/kafka-topics.sh --create --topic zilla-proxy-test --partitions 3 --replication-factor 3 --command-config client.properties --bootstrap-server <tls-bootstrap-server-names>

A quick summary of what just happened

1. The Kafka client with access to the public internet issued a request to create a new topic
2. This request was directed to the internet-facing Network Load Balancer
3. The Network Load Balancer forwarded the request to the Zilla proxy
4. The Zilla proxy routed the request to the appropriate MSK broker
5. The topic was created in the MSK broker
6. Public access was verified

Publish messages

Publish two messages to the newly created topic via the following producer command:

bin/kafka-console-producer.sh --topic zilla-proxy-test --producer.config client.properties --broker-list <tls-bootstrap-server-names>

A prompt will appear for you to type in the messages:

>This is my first event
>This is my second event

Receive messages

Read these messages back via the following consumer command:

bin/kafka-console-consumer.sh --topic zilla-proxy-test --from-beginning --consumer.config client.properties --bootstrap-server <tls-bootstrap-server-names>

You should see the This is my first event and This is my second event messages.

This is my first event
This is my second event

Conclusion

You have successfully deployed the Zilla Plus for Amazon MSK Secure Public Access. Instructions on how to Monitor and Upgrade your Zilla proxy can be found in the managing a cloudformation stack section.